English
Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
Mobile Outdoor Equipment Construction Machinery Sinotruck HOWO 4X4 Awd Maintenance Service Vehicle Truck
Description
Basic Info.
| Model NO. | FY5160WST |
| Drive Wheel | 4×2 |
| Shape | Single Bridge |
| Seats | ≤5 |
| Horsepower | 150-250hp |
| Engine Capacity | ＜4L |
| Heat Preservation Type | Color Plate |
| Tire Certification | ECE, ISO, DOT |
| Tire Design | Radial |
| Condition | New |
| Tools 4 | Drilling Machine |
| Model | Mobile Workshop |
| Tools 5 | Vice |
| Tools 2 | Welding Set |
| Tools 3 | Air Compressor |
| Tools 1 | Power Set (Generator) |
| Transport Package | Roro or Bulk Cargo Ship |
| Specification | 6000x2300x2850mm |
| Trademark | FUYA |
| Origin | Hubei |
| HS Code | 8705909990 |
| Production Capacity | 1000PCS/Yr |
Product Description
Mobile outdoor equipment construction machinery sinotruck howo 4x4 AWD maintenance service vehicle truck*-----------------------------------------------------------------
*100% new condition by manufacturer direct sale*
*100% quality guaranteed*
» I. QUICK DETAILS
workshop truck (also called maintenance truck, mobile workshop truck, repairing truck, Workshop light truck, Maintaining truck, maintenance vehicle, Mobile Workshop, Rescue vehicle etc.) is used to supply intended lube for trucks and machinery which are not convenient to go to the maintenance workshop or it's too far away from working place. Workshop truck is usually quipped with air compressor, grease pump and lubrication equipments. Due to the rigid substructure and the robust shelter configuration, the lube truck has a good performance going cross country and less limitations for the place of deployment. Workshop truck could used as a mobile workshop if equipped with an on-board power supply, versatile tool sets(mechanic tool kit, electrician tool kit), working floodlight, securing straps, etc as special requirements.
» II.SPECIFICATION OF WORKSHOP TRUCK
| SPECIFICATIONS of Mobile outdoor equipment construction machinery sinotruck howo 4x4 AWD maintenance service vehicle truck | ||
| General Information | Wheelbase | 3800mm |
| Length | 6760mm | |
| Width | 2030mm | |
| Height | 3150mm | |
| Front Overhang | 1015 mm | |
| Rear Overhang | 1930 mm | |
| Total Mass | 6650 kg | |
| Truck Pay loading | 5880 kg | |
| Engine | Model | I-SUZU 4KH1-TC |
| Horsepower | 130hp @3400rpm | |
| Torque | 280 N.m @1700/ r/min | |
| Displacement | 2.999L/ 4 cylinders | |
| Emission Standard | Euro 3 | |
| Fuel Tank Capacity | 100liters | |
| Clutch Disc | 325mm | |
| Gearbox Model | MSB-5S/ 5M 5+1 Speed | |
| Torque of Gearbox | 230/ 260/ 280 N.m | |
| Max. Geared Speed | 100 km/h | |
| Chassis Frame | 172mmx65mmx4+3mm | |
| Rear Axle Rating | 4,389kg | |
| Front Axle Rating | 2,261kg; Rigid I beam | |
| Quantity | 6+1spare | |
| Tire Size | 7.00 -16, (ALL WHEELS) | |
| Ply Rating | 14PR | |
| Diesel Generator | Power | 24KW/ 30KVA |
| Frequency | 50 (Hz) | |
| Output Voltage | 400V/ 230V | |
| Rated Current | 43.2A | |
| Speed | 1500 (RPM) | |
| Diesel Engine Make | CUMMINS | |
| Cylinders& Structure | 4/L | |
| Bore x Stroke | 102x120 mm | |
| Starting | DC24V electric starting | |
| Injection | Direct | |
| Insulation Class | H | |
| Aspiration | Turbocharged | |
| Welding Rectifier | Nominal Capacity | 24KV/A |
| Operation | Manual | |
| Drive Type | Electric | |
| Rated Input Voltage | 380v | |
| Rated Output Current | 315A | |
| Rated Frequency | 50HZ | |
| Current Range | 80-315A | |
| Open-Circuit Voltage | 70V | |
| Welding | Contact arc | |
| Welding Cable | 2x15m | |
| Electrode Holder | 300A | |
| Cooling | Forced air cooling | |
| Insulation Class | F | |
| Flame Cutoff Equipment | Torch Working Pressure | 50 (KN) |
| Welding/ Cutting Thickness | 50 (mm) | |
| Torch Length | 500 (mm) | |
| Oxygen Cylinder | Not included | |
| Propane Cylinder | Not included | |
| Oxygen Reducer | 1 unit | |
| Hose | 2x15m | |
» IV. SHIPPING:RORO/BULK VESSEL/CONTAINER
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping. BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.CONTAINER: The truck is put into the container. This model is used for small model trucks
» V. ABOUT US
HUBEI FUYA VEHICLE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,sales and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck , refrigerated truck and etc. Main info as below:
- Established from 2004.
- 12 independents workshops.
- 1000 sets of equipment, 25 assemble lines.
- 300 senior engineers and technicians. About 8000 workers.
- 800kinds of LPG, trucks and semi-trailers.
- 20 years wholesale experience
- Turnover 250 million and Export 20million annually
- Turnover 2 billion trucks and semi-trailers annually.
- LPG/Truck Sold to 90 countries
- Cooperates with DONGFENG,SINOTRUK,I SUZU,FOTON,FAW,BEIBEN etc.
» VI. FAQ
Why choose us?
Experience
More than 15 years experience of production,sales,research and development in the field of special trucks.
Specialization
We can produce according to your demand, the material,the size, the color and the logo is optional for you.
Good quality
Has solid technology, advanced equipments;Reliant quality and flexible modes of operation also have strict quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with sgs,bv certifcate as well.
Chassis supply
We have a very good long term cooperation relationship with chassis manufacturer,such as dongfeng,foton,sinotruck,shacman,faw,hino,camc,north-benz,ect.
Production supply capacity
Company scale
More than 8000 employees with 1000 acres factory, total asset 2 billion.
We manufacture the truck as soon as possible once your order confirmed.And for the stock, we can delivery it immediately.
Any more information regarding to mobile workshop truck, please do not hesitate contact with us!
Our Contact
